Mostrando los servicios y dispositivos del Bora.

Ver el tema anterior Ver el tema siguiente Ir abajo

Mostrando los servicios y dispositivos del Bora.

Mensaje  Roamaz el Sáb Feb 25, 2012 4:41 am

Bueno, señoritos, hoy toca ver como se inicializa nuestro Bora y que dispositivos carga al arrancar la tablet.

Paso 1: Descargais del market el programa "terminal emulator".

Paso 2: Ejecutas el programa.

""""" 3: Escribís cd/mnt/sdcard, luego "dmesg" sin comillas, y lo direccionais a un archivo llamado p.ej. inicio-bora.txt

3. Me explico: en consola, escribís dmseg > inicio-bora.txt y ya esta, salis de la consola escribiendo "exit" dos veces y con el "file manager" leéis el archivo que habéis creado.

4. Paciencia, el inicio en el texto es largo de narices.

y 5 (ahorraos el chiste Very Happy ) veréis que incluso carga drivers de un supuesto bluetooth.

En un rato pongo el mio.

S2s.

PD: El archivo pasadlo al pc y lo podreis leer mas tranquilamente.

Este es el mio que seguramente es igual que el vuestro.

<5>[ 0.000000] Linux version 2.6.36-android (inet_qgb@InetSoftware) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #10 PREEMPT Sat Dec 3 12:53:41 CST 2011
<6>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<6>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<6>[ 0.000000] Machine: sun4i
<6>[ 0.000000] Lichee System fixup
>>>> Version <<<
<6>[ 0.000000] Total Detected Memory: 512MB with 1 banks
<6>[ 0.000000] fbmem: start=0x5a000000, size=0x02000000
<6>[ 0.000000] Memory Reserved:
<6>[ 0.000000] VE: 0x43000000, 0x04a00000
<6>[ 0.000000] FB: 0x5a000000, 0x02000000
<6>[ 0.000000] G2D: 0x58000000, 0x01000000
<6>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 114688
<7>[ 0.000000] free_area_init_node: node 0, pgdat c06b1ae0, node_mem_map c076d000
<7>[ 0.000000] DMA zone: 896 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 113792 pages, LIFO batch:31
<6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nandb rw init=/init fbmem=32M@0x5a000000 loglevel=8
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 448MB = 448MB total
<5>[ 0.000000] Memory: 322228k/322228k available, 136524k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xfee00000 - 0xffe00000 ( 16 MB)
<5>[ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc002e000 ( 152 kB)
<5>[ 0.000000] .text : 0xc002e000 - 0xc067c000 (6456 kB)
<5>[ 0.000000] .data : 0xc067c000 - 0xc06b26e0 ( 218 kB)
<6>[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:96
<6>[ 0.000000] timer_set_mode: periodic
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000000] Calibrating delay loop... 1005.97 BogoMIPS (lpj=5029888)
<6>[ 0.240000] pid_max: default: 32768 minimum: 301
<6>[ 0.250000] Mount-cache hash table entries: 512
<6>[ 0.250000] CPU: Testing write buffer coherency: ok
<6>[ 0.250000] devtmpfs: initialized
<6>[ 0.250000] DRAM Size: 512
<6>[ 0.250000] regulator: core version 0.5
<6>[ 0.250000] NET: Registered protocol family 16
<6>[ 0.250000] No ATAGs?
<6>[ 0.250000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>[ 0.250000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>[ 0.250000] bio: create slab <bio-0> at 0
<5>[ 0.250000] SCSI subsystem initialized
<7>[ 0.250000] libata version 3.00 loaded.
<6>[ 0.250000] usbcore: registered new interface driver usbfs
<6>[ 0.250000] usbcore: registered new interface driver hub
<6>[ 0.250000] usbcore: registered new device driver usb
<6>[ 0.250000] Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>[ 0.260000] Bluetooth: Core ver 2.15
<6>[ 0.260000] NET: Registered protocol family 31
<6>[ 0.260000] Bluetooth: HCI device and connection manager initialized
<6>[ 0.260000] Bluetooth: HCI socket layer initialized
<6>[ 0.260000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.260000] Init eGon pin module V2.0
<6>[ 0.260000] Switching to clocksource aw 64bits couter
<6>[ 0.260000] NET: Registered protocol family 2
<6>[ 0.260000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.260000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.260000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.260000] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.260000] TCP reno registered
<6>[ 0.260000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.260000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.260000] NET: Registered protocol family 1
<6>[ 0.260000] RPC: Registered udp transport module.
<6>[ 0.260000] RPC: Registered tcp transport module.
<6>[ 0.260000] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.270000] sw_sys: init
<6>[ 0.270000] [pm]aw_pm_init!
<6>[ 0.270000] ashmem: initialized
<6>[ 0.280000] NTFS driver 2.1.29 [Flags: R/W].
<6>[ 0.280000] fuse init (API version 7.15)
<6>[ 0.280000] msgmni has been set to 629
<6>[ 0.280000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.280000] io scheduler noop registered
<6>[ 0.280000] io scheduler deadline registered
<6>[ 0.280000] io scheduler cfq registered (default)
<7>[ 0.280000] G2D: drv_g2d_init
<6>[ 0.280000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
<6>[ 0.280000] G2D: head:d8000000,tail:d9000000
<6>[ 0.280000] G2D: Module initialized.major:251
<6>[ 0.280000] sw-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a sw-uart0
<6>[ 0.290000] console [ttyS0] enabled
<6>[ 0.300000] sw-uart.2: ttyS2 at MMIO 0x1c28800 (irq = 3) is a sw-uart2
<6>[ 0.300000] brd: module loaded
<6>[ 0.310000] loop: module loaded
<6>[ 0.310000] [NAND]nand driver, init.
<6>[ 0.320000] [NAND] nand gpio_request
<6>[ 0.320000] [NAND] nand driver version: 0x2 0x6
<6>[ 0.330000] nand interrupte register ok
<6>[ 0.330000] ret of NFC_ChangMode is 0
<6>[ 0.330000] dma_hdle is 0
<6>[ 0.340000] dma_hdle is 10000008
<6>[ 0.370000] The 0 disk name = BOOTFS, class name = DISK, disk size = 32768
<6>[ 0.370000] The 1 disk name = LROOTFS, class name = DISK, disk size = 65536
<6>[ 0.380000] The 2 disk name = LSYSTEMFS, class name = DISK, disk size = 307200
<6>[ 0.390000] The 3 disk name = LDATAFS, class name = DISK, disk size = 2572288
<6>[ 0.400000] The 4 disk name = MISC, class name = DISK, disk size = 2048
<6>[ 0.410000] The 5 disk name = LRECOVERYFS, class name = DISK, disk size = 65536
<6>[ 0.410000] The 6 disk name = LCACHEFS, class name = DISK, disk size = 262144
<6>[ 0.420000] The 7 disk name = UDISK, class name = DISK, disk size = 4472832
<6>[ 0.430000] The 7 disk size = 4472832
<6>[ 0.430000] part total count = 8
<6>[ 0.440000] nanda:
<6>[ 0.550000] nandb: unknown partition table
<6>[ 0.550000] nandc: unknown partition table
<6>[ 0.660000] nandd: unknown partition table
<6>[ 0.670000] nande: unknown partition table
<6>[ 0.670000] nandf: unknown partition table
<6>[ 0.680000] nandg: unknown partition table
<6>[ 0.680000] nandh:
<6>[ 0.690000] [NAND]nand driver, ok.
<6>[ 0.690000] PPP generic driver version 2.4.2
<6>[ 0.700000] PPP Deflate Compression module registered
<6>[ 0.700000] PPP BSD Compression module registered
<6>[ 0.710000] PPP MPPE Compression module registered
<6>[ 0.710000] NET: Registered protocol family 24
<6>[ 0.720000] emac driver is disabled
<6>[ 0.720000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.730000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.740000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc06f069c
<6>[ 0.740000] [sw-ehci1]: open clock
<6>[ 0.770000] [sw-ehci1]: Set USB Power ON
<6>[ 0.770000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.780000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
<6>[ 0.790000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 0.820000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<6>[ 0.820000] hub 1-0:1.0: USB hub found
<6>[ 0.830000] hub 1-0:1.0: 1 port detected
<6>[ 0.830000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc06f07ac
<6>[ 0.840000] [sw-ohci1]: open clock
<6>[ 0.860000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 0.870000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
<6>[ 0.880000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
<6>[ 0.940000] hub 2-0:1.0: USB hub found
<6>[ 0.940000] hub 2-0:1.0: 1 port detected
<6>[ 0.950000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc06f08c0
<6>[ 0.960000] [sw-ehci2]: open clock
<6>[ 0.980000] [sw-ehci2]: Set USB Power ON
<6>[ 0.990000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.990000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
<6>[ 1.000000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>[ 1.030000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<6>[ 1.030000] ehci_irq: port change detect
<6>[ 1.040000] hub 3-0:1.0: USB hub found
<6>[ 1.040000] hub 3-0:1.0: 1 port detected
<6>[ 1.040000] [sw-ehci2]: sw_usb_disable_ehci
<6>[ 1.050000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc06f08c0
<6>[ 1.060000] sw-ehci sw-ehci.2: remove, state 1
<6>[ 1.060000] usb usb3: USB disconnect, address 1
<6>[ 1.070000] sw-ehci sw-ehci.2: USB bus 3 deregistered
<6>[ 1.070000] [sw-ehci2]: Set USB Power OFF
<6>[ 1.080000] [sw-ehci2]: close clock
<6>[ 1.080000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc06f09d0
<6>[ 1.090000] [sw-ohci2]: open clock
<6>[ 1.120000] [sw-ohci2]: Set USB Power ON
<6>[ 1.120000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 1.130000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 3
<6>[ 1.140000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
<6>[ 1.200000] hub 3-0:1.0: USB hub found
<6>[ 1.200000] hub 3-0:1.0: 1 port detected
<6>[ 1.210000] [sw-ohci2]: sw_usb_disable_ohci
<6>[ 1.210000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc06f09d0
<6>[ 1.220000] sw-ohci sw-ohci.2: remove, state 1
<6>[ 1.230000] usb usb3: USB disconnect, address 1
<6>[ 1.230000] sw-ohci sw-ohci.2: USB bus 3 deregistered
<6>[ 1.240000] [sw-ohci2]: Set USB Power OFF
<6>[ 1.240000] [sw-ohci2]: close clock
<6>[ 1.250000] Initializing USB Mass Storage driver...
<6>[ 1.250000] usbcore: registered new interface driver usb-storage
<6>[ 1.260000] USB Mass Storage support registered.
<6>[ 1.260000] usbcore: registered new interface driver usbserial
<6>[ 1.270000] USB Serial support registered for generic
<6>[ 1.280000] usbcore: registered new interface driver usbserial_generic
<6>[ 1.280000] usbserial: USB Serial Driver core
<6>[ 1.290000] USB Serial support registered for GSM modem (1-port)
<6>[ 1.290000] usbcore: registered new interface driver option
<6>[ 1.300000] option: v0.7.2:USB Driver for GSM modems
<6>[ 1.310000] WRN:L158(drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(1) id failed
<6>[ 1.320000] WRN:L164(drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(1) det_vbus failed
<6>[ 1.330000] WRN:L158(drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(2) id failed
<6>[ 1.340000] WRN:L164(drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(2) det_vbus failed
<6>[ 1.370000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>[ 1.370000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 3
<6>[ 1.380000] hub 3-0:1.0: USB hub found
<6>[ 1.380000] hub 3-0:1.0: 1 port detected
<6>[ 1.390000] android init
<6>[ 1.390000] android-platform_device_register
<6>[ 1.400000] ------print_msc_config-----
<6>[ 1.400000] vendor_id = 0x18d1
<6>[ 1.410000] mass_storage_id = 0x1
<6>[ 1.410000] adb_id = 0x2
<6>[ 1.420000] usb_manufacturer_name = USB Developer
<6>[ 1.420000] usb_product_name = Android
<6>[ 1.430000] usb_serial_number = 20080411 > Nº de serie del USB.
<6>[ 1.430000] msc_vendor_name = USB 2.0
<6>[ 1.430000] msc_product_name = USB Flash Driver
<6>[ 1.440000] msc_release = 100
<6>[ 1.440000] luns = 3
<6>[ 1.450000] ---------------------------
<6>[ 1.450000] android_probe pdata: c06999ec
<6>[ 1.460000] WRN:L2671(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
<6>[ 1.470000] android_bind
<7>[ 1.470000] android_bind_config
<4>[ 1.470000] Gadget Android: controller 'sw_usb_udc' not recognized
<6>[ 1.480000] WRN:L2671(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
<6>[ 1.490000] android_usb gadget: android_usb ready
<6>[ 1.490000] f_adb init
<6>[ 1.500000] android_register_function adb
<6>[ 1.500000] f_mass_storage init
<6>[ 1.500000] fsg_probe pdev: c0699b48, pdata: c0699a10
<6>[ 1.510000] android_register_function usb_mass_storage
<6>[ 1.520000] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.520000] android_usb gadget: Number of LUNs=3
<6>[ 1.530000] lun0: LUN: removable file: (no medium)
<6>[ 1.530000] lun1: LUN: removable file: (no medium)
<6>[ 1.540000] lun2: LUN: removable file: (no medium)
<6>[ 1.550000] adb_bind_config
<6>[ 1.550000] [ps2]: sw_ps2_init
<4>[ 1.550000] ps2: cannot find any unsing configuration for 2 ps/2 controller, return directly!
<6>[ 1.560000] mice: PS/2 mouse device common for all mice
<6>[ 1.570000] sun4i RTC version 0.1
<6>[ 1.570000] sun4i-rtc sun4i-rtc: f23_rtc_probe tmp_data = 380239881
<6>[ 1.580000] using rtc device, rtc, for alarms
<6>[ 1.580000] sun4i-rtc sun4i-rtc: rtc core: registered rtc as rtc0
<6>[ 1.590000] i2c /dev entries driver
<6>[ 1.590000] ================power===================, status = 0
<6>[ 1.600000] gsensor: registered bma250 @ addr 0x18
<6>[ 1.610000] ctp_used == 1.
<6>[ 1.610000] i2c_info_ctp[0].type is: Goodix-TS, name is Goodix-TS.
<6>[ 1.620000] i2c: Goodix-TS_ctp_twi_addr is 85, 0x55.
<6>[ 1.620000] i2c: Goodix-TS_ctp_twi_id is 2.
<6>[ 1.630000] ================Goodix-TS==============, twi_id = 2, status = 0
<6>[ 1.640000] i2c_info_virtual_btn will i2c_register_board_info
<6>[ 1.640000] bus num = 0, twi used = 1
<6>[ 1.650000] bus num = 1, twi used = 1
<6>[ 1.650000] bus num = 2, twi used = 1
<6>[ 1.650000] config i2c gpio with gpio_config api
<6>[ 1.660000] twi0, apb clock = 24000000
<6>[ 1.660000] _twi_set_clk: clk_n = 0, clk_m = 5
<6>[ 1.670000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
<6>[ 1.680000] I2C: i2c-0: AW16XX I2C adapter
<6>[ 1.680000] **********start************
<6>[ 1.690000] 0x40
<6>[ 1.690000] 0xf8
<6>[ 1.690000] 0x28
<6>[ 1.690000] 0x0
<6>[ 1.690000] 0x0
<6>[ 1.700000] **********end************
<6>[ 1.700000] twi1, apb clock = 24000000
<6>[ 1.710000] _twi_set_clk: clk_n = 0, clk_m = 11
<6>[ 1.710000] I2C: i2c-1: AW16XX I2C adapter
<6>[ 1.720000] **********start************
<6>[ 1.720000] 0x40
<6>[ 1.720000] 0xf8
<6>[ 1.720000] 0x58
<6>[ 1.730000] 0x0
<6>[ 1.730000] 0x0
<6>[ 1.730000] **********end************
<6>[ 1.730000] twi2, apb clock = 24000000
<6>[ 1.740000] _twi_set_clk: clk_n = 0, clk_m = 11
<6>[ 1.740000] I2C: i2c-2: AW16XX I2C adapter
<6>[ 1.750000] **********start************
<6>[ 1.750000] 0x40
<6>[ 1.750000] 0xf8
<6>[ 1.760000] 0x58
<6>[ 1.760000] 0x0
<6>[ 1.760000] 0x0
<6>[ 1.760000] **********end************
<6>[ 1.770000] lirc_dev: IR Remote Control driver registered, major 250
<6>[ 1.770000] IR NEC protocol handler initialized
<6>[ 1.780000] IR RC5(x) protocol handler initialized
<6>[ 1.780000] IR RC6 protocol handler initialized
<6>[ 1.790000] IR JVC protocol handler initialized
<6>[ 1.790000] IR Sony protocol handler initialized
<6>[ 1.800000] IR LIRC bridge handler initialized
>>> Para ratones y teclado infrarojos o inhalambricos.
<6>[ 1.800000] Linux video capture interface: v2.00
<6>[ 1.810000] [cedar dev]: install start!!!
<6>[ 1.810000] [cedar dev]: install end!!!
<6>[ 1.820000] [ace_drv] init end!!!
<6>[ 1.820000] [pa_drv] start!!!
<6>[ 1.830000] [pa_drv] init end!!!
<6>[ 1.830000] regulator: axp20_ldo1: 1300 mV
<6>[ 1.840000] regulator: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>[ 1.840000] regulator: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
<6>[ 1.850000] regulator: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
<6>[ 1.860000] regulator: axp20_buck2: 700 <--> 2275 mV at 1400 mV
<6>[ 1.870000] regulator: axp20_buck3: 700 <--> 3500 mV at 1250 mV
<6>[ 1.870000] regulator: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
>>> Tiempo de espera de la pantalla <<<
<6>[ 1.880000] input: axp20-supplyer as /devices/platform/aw16xx-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
<6>[ 1.910000] device-mapper: uevent: version 1.0.3
<6>[ 1.910000] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
<6>[ 1.920000] device-mapper: multipath: version 1.1.1 loaded
<6>[ 1.930000] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[ 1.930000] Bluetooth: HCI UART driver ver 2.2
<6>[ 1.940000] Bluetooth: HCI H4 protocol initialized
<6>[ 1.940000] Bluetooth: HCI BCSP protocol initialized
<6>[ 1.950000] Bluetooth: HCILL protocol initialized
>>> ¿Bluetooth? <<<
<6>[ 1.950000] [mmc_pm]: no sdio card used in configuration
<6>[ 1.960000] [mmc]: awsmc_init
<6>[ 1.960000] [mmc]: awsmc controller unsing config sdc0 1, sdc1 1, sdc2 0, sdc3 1
<6>[ 1.970000] [mmc]: awsmc.0: pdev->name: awsmc, pdev->id: 00000000
<6>[ 1.980000] [mmc]: smc 0, source = sdram_pll_p, src_clk = 408000000, mclk 40800000,
<6>[ 1.990000] [mmc]: MMC Driver init host 0
<6>[ 1.990000] [mmc]: sdc 0 idma des address d9aac000
<6>[ 2.000000] [mmc]: mmc 0 suspend pins
<6>[ 2.000000] [mmc]: awsmc.0: Initialisation Done. ret 0
<6>[ 2.010000] [mmc]: awsmc.1: pdev->name: awsmc, pdev->id: 00000001
<6>[ 2.010000] [mmc]: smc 1, source = sdram_pll_p, src_clk = 408000000, mclk 40800000,
<6>[ 2.020000] [mmc]: MMC Driver init host 1
<6>[ 2.030000] [mmc]: sdc 1 idma des address d9ab0000
<6>[ 2.030000] [mmc]: mmc 1 suspend pins
<6>[ 2.040000] [mmc]: awsmc.1: Initialisation Done. ret 0
<6>[ 2.040000] [mmc]: awsmc.3: pdev->name: awsmc, pdev->id: 00000003
<6>[ 2.050000] [mmc_pm]: No sdio card, please check your config !!
<6>[ 2.060000] [mmc_pm]: No sdio card, please check your config !!
<6>[ 2.060000] [mmc]: smc 3, source = sdram_pll_p, src_clk = 408000000, mclk 81600000,
<6>[ 2.070000] [mmc]: MMC Driver init host 3
<6>[ 2.080000] [mmc]: sdc 3 idma des address d9ab4000
<6>[ 2.080000] [mmc]: mmc 3 suspend pins
<6>[ 2.090000] [mmc]: awsmc.3: Initialisation Done. ret 0
<6>[ 2.090000] usbcore: registered new interface driver usbhid
<6>[ 2.100000] usbhid: USB HID core driver
<6>[ 2.100000] logger: created 64K log 'log_main'
<6>[ 2.110000] logger: created 256K log 'log_events'
<6>[ 2.110000] logger: created 64K log 'log_radio'
<6>[ 2.120000] logger: created 64K log 'log_system'
<6>[ 2.120000] enter sun4i Audio codec!!!
<6>[ 2.130000] sun4i audio support initialized
<7>[ 2.130000] baseaddr = dc84ac00
<3>[ 2.140000] audiocodec_adap_awxx_init: script_parser_fetch err.
<6>[ 2.140000] sun4i Audio codec successfully loaded..
<4>[ 2.150000] No device for DAI sun4i-hdmiaudio
<4>[ 2.160000] No device for DAI SNDHDMI
<6>[ 2.160000] asoc: SNDHDMI <-> sun4i-hdmiaudio mapping ok
<6>[ 2.170000] [SPDIF]sun4i-spdif cannot find any using configuration for controllers, return directly!
<6>[ 2.180000] [SPDIF]sndspdif cannot find any using configuration for controllers, return directly!
<6>[ 2.190000] [SPDIF]sun4i_sndspdif cannot find any using configuration for controllers, return directly!
<6>[ 2.200000] ALSA device list:
<6>[ 2.200000] #0: sun4i-CODEC Audio Codec
<6>[ 2.200000] #1: SUN4I_SNDHDMI (SNDHDMI)
<6>[ 2.210000] nf_conntrack version 0.5.0 (5034 buckets, 20136 max)
<6>[ 2.220000] IPv4 over IPv4 tunneling driver
<6>[ 2.220000] GRE over IPv4 tunneling driver
<6>[ 2.230000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.230000] TCP cubic registered
<6>[ 2.240000] NET: Registered protocol family 10
<6>[ 2.240000] IPv6 over IPv4 tunneling driver
<6>[ 2.250000] NET: Registered protocol family 17
<6>[ 2.250000] NET: Registered protocol family 15
<6>[ 2.260000] Bluetooth: L2CAP ver 2.15
<6>[ 2.260000] Bluetooth: L2CAP socket layer initialized
<6>[ 2.270000] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 2.270000] Bluetooth: SCO socket layer initialized
<6>[ 2.280000] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.280000] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.290000] Bluetooth: RFCOMM ver 1.11
<6>[ 2.290000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.300000] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.300000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>>>>>> DRIVERS BLUETOOTH <<<<<<<<<<<<<< ¿ANDE ANDARÁ?.
<6>[ 2.310000] L2TP core driver, V2.0
<6>[ 2.310000] PPPoL2TP kernel driver, V2.0
<6>[ 2.320000] lib80211: common routines for IEEE802.11 drivers
<7>[ 2.330000] lib80211_crypt: registered algorithm 'NULL'
<6>[ 2.330000] [mmc_pm]: No sdio card, please check your config !!
<6>[ 2.340000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<4>[ 2.360000] regulator_init_complete: incomplete constraints, leaving axp20_buck3 on
<4>[ 2.360000] regulator_init_complete: incomplete constraints, leaving axp20_buck2 on
<4>[ 2.380000] regulator_init_complete: incomplete constraints, leaving axp20_ldo4 on
<4>[ 2.380000] regulator_init_complete: incomplete constraints, leaving axp20_ldo3 on
<4>[ 2.400000] regulator_init_complete: incomplete constraints, leaving axp20_ldo2 on
<6>[ 2.400000] sun4i-rtc sun4i-rtc: f23_rtc_gettime
<6>[ 2.420000] sun4i-rtc sun4i-rtc: read time 2012-2-24 15:18:54
<6>[ 2.420000] sun4i-rtc sun4i-rtc: setting system clock to 2012-02-24 15:18:54 UTC (1330096734) >>> Fecha y hora de la tablet.
<3>[ 2.510000] EXT3-fs (nandb): error: couldn't mount because of unsupported optional features (240)
<3>[ 2.520000] EXT2-fs (nandb): error: couldn't mount because of unsupported optional features (244)
<4>[ 2.680000] EXT4-fs (nandb): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 2.690000] EXT4-fs (nandb): recovery complete
<6>[ 2.700000] EXT4-fs (nandb): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 2.710000] VFS: Mounted root (ext4 filesystem) on device 93:8.
<6>[ 2.710000] devtmpfs: mounted
<6>[ 2.720000] Freeing init memory: 152K
<6>[ 3.000000] [mmc]: mmc 0 detect change, present 1
<4>[ 3.000000] [LCD] lcd_module_init
<6>[ 3.100000] [mmc]: mmc 0 resume pins
<6>[ 3.140000] [mmc]: sdxc_request_done(L973): smc 0 err, cmd 52, RTO !!
<6>[ 3.150000] [mmc]: sdxc_request_done(L973): smc 0 err, cmd 52, RTO !!
<6>[ 3.160000] [mmc]: sdxc_request_done(L973): smc 0 err, cmd 5, RTO !!
<6>[ 3.170000] [mmc]: sdxc_request_done(L973): smc 0 err, cmd 5, RTO !!
<6>[ 3.180000] [mmc]: sdxc_request_done(L973): smc 0 err, cmd 5, RTO !!
<6>[ 3.180000] [mmc]: sdxc_request_done(L973): smc 0 err, cmd 5, RTO !!
<6>[ 3.260000] mmc0: new high speed SDHC card at address e624
<6>[ 3.270000] mmcblk0: mmc0:e624 SU08G 7.40 GiB <<<<MEMORIA TOTAL EN MICRO-SD INTERNA>>>>>
<6>[ 3.270000] mmcblk0: p1
<3>[ 3.680000] init: width = 800
<3>[ 3.690000] init: height = 480
<3>[ 3.690000] init: s.st_size = 1536000
<3>[ 3.910000] init: do_mount
<3>[ 3.910000] init: do_mount
<3>[ 3.910000] init: do_mount
<3>[ 3.920000] init: do_mount
<3>[ 3.920000] init: do_mount
<3>[ 3.920000] init: do_mount
<6>[ 3.930000] EXT4-fs (nandc): barriers disabled
<4>[ 3.960000] EXT4-fs (nandc): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 3.970000] EXT4-fs (nandc): recovery complete
<6>[ 3.970000] EXT4-fs (nandc): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 3.980000] init: do_mount
<6>[ 4.000000] EXT4-fs (nandd): barriers disabled
<6>[ 7.340000] EXT4-fs (nandd): recovery complete
<6>[ 7.350000] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 7.360000] init: do_umount: /data
<6>[ 7.570000] EXT4-fs (nandd): barriers disabled
<6>[ 7.570000] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,barrier=0
<3>[ 7.580000] init: do_mount
<6>[ 7.600000] EXT4-fs (nandg): barriers disabled
<4>[ 8.470000] JBD2: Disabling barriers on nandb-8, not supported by device
<6>[ 8.480000] EXT4-fs (nandg): recovery complete
<6>[ 8.480000] EXT4-fs (nandg): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 8.490000] init: do_mount
<3>[ 8.500000] init: dont need format /dev/block/nandh
<4>[ 8.690000] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[ 8.710000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'] Esto es para el recovery.
<5>[ 8.750000] =========ft5x-ts-init============
<5>[ 8.760000] VERSION =Rocky@inet@20111102
<3>[ 8.760000] ft5x_ts_init: name Goodix-TS does not match FT5X_NAME.
<6>[ 8.810000] goodix_ts_init
<6>[ 8.810000] goodix_ts: revert_x_flag = 0.
<6>[ 8.810000] goodix_ts: revert_y_flag = 0.
<6>[ 8.820000] ===============================GT801 Probe===========================
<6>[ 9.260000] Begin goodix i2c test
<6>[ 9.270000] ===== goodix i2c test ok=======
<6>[ 9.270000] ABS_MT_POSITION_X(480)=SCREEN_MAX_HEIGHT =480£¬ABS_MT_POSITION_Y(800)=SCREEN_MAX_WIDTH=800
<6>[ 9.280000] input: gt80x as /devices/virtual/input/input1
<6>[ 9.330000] ==register_early_suspend =
<6>[ 9.330000] Read Goodix version
<6>[ 9.400000] Goodix-TS 2-0055: GT80X Version: GT801_1R07_2011081501_Goodix_Tech
<6>[ 9.410000] ========Probe Ok================
<6>[ 9.430000] HA2608 i2c touch panel device driver module init
<6>[ 9.440000] input: inet-ha2608-key as /devices/virtual/input/input2
<6>[ 9.450000] HA2608 i2c touchscreen device probe done.
<6>[ 9.480000] input: sun4i-keyboard as /devices/virtual/input/input3
<6>[ 9.510000] ==register_early_suspend =
<6>[ 9.550000] UMP: UMP device driver loaded
<6>[ 9.680000] mali: use config clk_div 3
<6>[ 9.690000] mali: clk_div 3
<6>[ 9.690000] Mali: mali clock set completed, clock is 320000000 Mhz
<6>[ 9.700000] mali: use config clk_div 3
<6>[ 9.710000] mali: clk_div 3
<6>[ 9.710000] Mali: mali clock set completed, clock is 320000000 Mhz
<6>[ 9.720000] Mali: Mali device driver loaded
<6>[ 9.840000] [CSI]Welcome to CSI driver
<6>[ 9.850000] [CSI]registered sub device,input_num = 0
<6>[ 9.850000] [CSI]V4L2 device registered as video0 < camara del bora.
<6>[ 9.890000] Bosch Sensortec Device detected!
<6>[ 9.890000] BMA250 registered I2C driver!
<6>[ 9.900000] input: bma250 as /devices/virtual/input/input4
<6>[ 9.980000] usbcore: registered new interface driver asix
<6>[ 10.010000] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
<6>[ 10.020000] usbcore: registered new interface driver rtl8150
<6>[ 10.070000] usbcore: registered new interface driver sr9700_android
<6>[ 10.120000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[ 10.160000] enabling adb
<6>[ 10.160000] adb_open
<6>[ 16.020000] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>[ 49.710000] request_suspend_state: wakeup (3->0) at 50245401766 (2012-02-24 15:19:41.786343259 UTC)
<6>[ 49.890000] sw_usb_enable_hcd: usbc_num = 2
<6>[ 49.890000] [sw-ehci2]: sw_usb_enable_ehci
<6>[ 49.920000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc06f08c0
<6>[ 49.920000] [sw-ehci2]: open clock
<6>[ 50.060000] [sw-ehci2]: Set USB Power ON
<6>[ 50.100000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 50.150000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
<6>[ 50.180000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>[ 50.200000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<6>[ 50.200000] ehci_irq: port change detect
<6>[ 50.210000] hub 4-0:1.0: USB hub found
<6>[ 50.220000] hub 4-0:1.0: 1 port detected
<6>[ 50.220000] [sw-ohci2]: sw_usb_enable_ohci
<6>[ 50.230000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc06f09d0
<6>[ 50.240000] [sw-ohci2]: open clock
<6>[ 50.260000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 50.340000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
<6>[ 50.360000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
<6>[ 50.420000] hub 5-0:1.0: USB hub found
<6>[ 50.420000] hub 5-0:1.0: 1 port detected
<6>[ 50.430000]
<6>[ 50.430000] rtw driver version=v3.1.2590.20110922
<6>[ 50.550000] usb 4-1: new high speed USB device using sw-ehci and address 2
<6>[ 50.580000] ##########rtw_suspend_lock_init ###########
<6>[ 50.700000] usbcore: registered new interface driver rtl8192cu
<6>[ 50.710000] register rtw_netdev_ops to netdev_ops
<6>[ 50.710000] CHIP TYPE: RTL8188C_8192C
<6>[ 50.770000]
<6>[ 50.770000] usb_endpoint_descriptor(0):
<6>[ 50.770000] bLength=7
<6>[ 50.870000] bDescriptorType=5
<6>[ 50.870000] bEndpointAddress=81
<6>[ 50.870000] wMaxPacketSize=200
<6>[ 50.870000] bInterval=0
<6>[ 50.870000] RT_usb_endpoint_is_bulk_in = 1
<6>[ 50.870000]
<6>[ 50.870000] usb_endpoint_descriptor(1):
<6>[ 50.870000] bLength=7
<6>[ 50.870000] bDescriptorType=5
<6>[ 50.870000] bEndpointAddress=2
<6>[ 50.870000] wMaxPacketSize=200
<6>[ 50.870000] bInterval=0
<6>[ 50.870000] RT_usb_endpoint_is_bulk_out = 2
<6>[ 50.870000]
<6>[ 50.870000] usb_endpoint_descriptor(2):
<6>[ 50.870000] bLength=7
<6>[ 50.870000] bDescriptorType=5
<6>[ 50.870000] bEndpointAddress=3
<6>[ 50.870000] wMaxPacketSize=200
<6>[ 50.870000] bInterval=0
<6>[ 50.870000] RT_usb_endpoint_is_bulk_out = 3
<6>[ 50.870000]
<6>[ 50.870000] usb_endpoint_descriptor(3):
<6>[ 50.870000] bLength=7
<6>[ 50.870000] bDescriptorType=5
<6>[ 50.870000] bEndpointAddress=84
<6>[ 50.870000] wMaxPacketSize=40
<6>[ 50.870000] bInterval=1
<6>[ 50.870000] RT_usb_endpoint_is_int_in = 4, Interval = 1
<6>[ 50.870000] nr_endpoint=4, in_num=2, out_num=2
<6>[ 50.870000]
<6>[ 50.870000] USB_SPEED_HIGH
<6>[ 50.870000] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
<6>[ 50.870000] RF_Type is 3!!
<6>[ 50.870000] EEPROM type is E-FUSE
<6>[ 50.870000] ====> ReadAdapterInfo8192C
<6>[ 50.870000] Boot from EFUSE, Autoload OK !
<6>[ 51.490000] EEPROMVID = 0x0bda
<6>[ 51.490000] EEPROMPID = 0x8176
<6>[ 51.530000] EEPROMCustomerID : 0x00
<6>[ 51.530000] EEPROMSubCustomerID: 0x00
<6>[ 51.620000] RT_CustomerID: 0x00

<6>[ 51.780000] EEPROMRegulatory = 0x0
<6>[ 51.790000] _ReadBoardType(0)
<6>[ 51.790000] BT Coexistance = disable
<6>[ 51.790000] RT_ChannelPlan: 0x0a
<6>[ 51.910000] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
<6>[ 51.950000] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<6>[ 51.960000] ### AntDivCfg(0)
<6>[ 51.960000] readAdapterInfo_8192CU(): REPLACEMENT = 1
<6>[ 52.050000] <==== ReadAdapterInfo8192C in 1180 ms
<6>[ 52.090000] rtw_register_early_suspend

<6>[ 52.340000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<3>[ 53.500000] init: untracked pid 228 exited
<6>[ 53.720000] +871x_drv - drv_open, bup=0
<6>[ 53.870000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
<6>[ 53.940000] fw_ver=v75, fw_subver=0, sig=0x88c0
<6>[ 54.180000] fw download ok!
<6>[ 54.180000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<6>[ 54.570000] ==> _InitAntenna_Selection ....
<6>[ 54.570000] IQK:Start!!!
<6>[ 54.630000] Path A IQK Success!!
<6>[ 54.710000] Path A IQK Success!!
<6>[ 54.840000] IQK: final_candidate is 0
<6>[ 54.840000] IQK: RegE94=101 RegE9C=b RegEA4=ff RegEAC=3ff RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
<6>[ 54.840000] Path A IQ Calibration Success !
<6>[ 55.030000] pdmpriv->TxPowerTrackControl = 1

<6>[ 55.100000] -871x_drv - drv_open, bup=1
<6>[ 55.100000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[ 56.160000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<6>[ 56.160000] set_mode = IW_MODE_INFRA
<6>[ 56.160000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<6>[ 57.490000] survey done event(c)
<6>[ 57.490000] set_mode = IW_MODE_INFRA
<6>[ 57.560000] wpa_set_auth_algs, AUTH_ALG_SHARED_KEY and AUTH_ALG_OPEN_SYSTEM [value]
<6>[ 57.610000] wpa_set_encryption, crypt.alg = WEP
<6>[ 57.640000] (1)wep_key_idx=0
<6>[ 57.640000] wep, set_tx=1
<6>[ 57.640000] ==> rtw_set_key algorithm(1),keyid(0),key_mask(1)
<6>[ 57.680000] =>rtw_wx_set_essid
<6>[ 57.690000] ssid=|, len=1
<6>[ 57.690000] new candidate: |(00:21:27:df:f1:1e) rssi:-51
<6>[ 57.690000] rtw_select_and_join_from_scanned_queue: candidate: |(00:21:27:df:f1:1e)
<6>[ 57.690000] link to new AP
<6>[ 57.690000] <=rtw_wx_set_essid
<6>[ 57.760000] link to Artheros AP
<6>[ 57.770000] OnAuthClient
<6>[ 57.770000] OnAssocRsp
<6>[ 57.770000] report_join_res(1)
<6>[ 57.790000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[ 57.790000] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
<6>[ 57.810000] HTOnAssocRsp
<6>[ 57.830000] update raid entry, mask=0x40000fff, arg=0x80
<6>[ 57.840000] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
<6>[ 57.840000] SetFwRsvdPagePkt
<6>[ 57.840000] Set RSVD page location to Fw.
<6>[ 57.840000] =>mlmeext_joinbss_event_callback
<6>[ 59.110000] rtl8192c_dm_RF_Saving(): RF_Save
<6>[ 63.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 63.110000] rtl8192c_dm_RF_Saving(): RF_Normal
<6>[ 63.120000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<7>[ 68.170000] wlan0: no IPv6 routers present
<6>[ 78.110000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 78.160000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 79.100000] rtl8192c_dm_RF_Saving(): RF_Save
<6>[ 79.420000] survey done event(4)
<6>[ 89.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 89.110000] rtl8192c_dm_RF_Saving(): RF_Normal
<6>[ 89.120000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 91.100000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 91.100000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 93.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 93.100000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 145.350000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 145.350000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 147.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 147.100000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 324.470000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 324.470000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 325.100000] rtl8192c_dm_RF_Saving(): RF_Save
<6>[ 327.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 327.100000] rtl8192c_dm_RF_Saving(): RF_Normal
<6>[ 327.120000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 365.260000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 365.260000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 367.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 367.100000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 491.020000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 491.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 491.110000] rtl8192c_dm_RF_Saving(): RF_Save
<6>[ 493.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 493.100000] rtl8192c_dm_RF_Saving(): RF_Normal
<6>[ 493.120000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 496.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 496.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 497.110000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 497.110000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 639.600000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 639.620000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 641.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 641.100000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 687.110000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 687.110000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 687.150000] rtl8192c_dm_RF_Saving(): RF_Save
<6>[ 695.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 695.100000] rtl8192c_dm_RF_Saving(): RF_Normal
<6>[ 695.130000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 929.100000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 929.100000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 929.130000] rtl8192c_dm_RF_Saving(): RF_Save
<6>[ 945.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 945.100000] rtl8192c_dm_RF_Saving(): RF_Normal
<6>[ 945.110000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 953.100000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 953.100000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 955.100000] rtl8192c_dm_RF_Saving(): RF_Save
<6>[ 961.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 961.100000] rtl8192c_dm_RF_Saving(): RF_Normal
<6>[ 961.120000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 989.100000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 989.100000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 991.110000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 991.110000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
<6>[ 992.510000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
<6>[ 992.560000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
<6>[ 993.100000] rtl8192c_dm_RF_Saving(): RF_Save
<6>[ 995.100000] rtw_set_ps_mode(): Enter 802.11 power save mode...
<6>[ 995.100000] rtl8192c_dm_RF_Saving(): RF_Normal
<6>[ 995.120000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2

Sigo investigando.



Última edición por Roamaz el Miér Feb 29, 2012 1:06 pm, editado 2 veces

_________________
Primux Bora.



Bora ICS 4.0.4+CWM+CM9.

Contribuid al foro o esto se hunde.

No respondo a preguntas por MP, hacedlas en el foro y todos aprendemos así.
avatar
Roamaz
Maestro Bora
Maestro Bora

Mensajes : 631
Fecha de inscripción : 01/02/2012
Edad : 53
Localización : /home/android/bora

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Ryw el Sáb Feb 25, 2012 5:41 am

Increible trabajoo! Como se nota quien maneja linux del que nooo!! Pues lo probare en el mio y me pondré a leer e investigar.
avatar
Ryw
Maestro Bora
Maestro Bora

Mensajes : 524
Fecha de inscripción : 31/01/2012
Edad : 26
Localización : Sevilla

http://primuxbora.el-foro.net

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  TinmvV el Sáb Feb 25, 2012 6:08 am

Y con estos datos que se puede hacer?

_________________
avatar
TinmvV
Forero Borero
Forero Borero

Mensajes : 314
Fecha de inscripción : 01/02/2012
Localización : Debajo de tu silla.

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Roamaz el Sáb Feb 25, 2012 6:36 am

TinmvV escribió:Y con estos datos que se puede hacer?

Investigar para una nueva actualizacion, comprobar que carga al inicio o no, que carga, donde, tamaño de la memoria, de la micro-sd, etc...

_________________
Primux Bora.



Bora ICS 4.0.4+CWM+CM9.

Contribuid al foro o esto se hunde.

No respondo a preguntas por MP, hacedlas en el foro y todos aprendemos así.
avatar
Roamaz
Maestro Bora
Maestro Bora

Mensajes : 631
Fecha de inscripción : 01/02/2012
Edad : 53
Localización : /home/android/bora

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Perpiq el Sáb Feb 25, 2012 6:38 am

Eso.... Que utilidad tiene conocer todos esos datos ?
¿Los puedes cambiar para introducir alguna mejora?
¿Que riesgo tiene tocar esas cosas....?
Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes

_________________
Que bueno es tener amigos a quien preguntar.....
avatar
Perpiq
Forero Borero
Forero Borero

Mensajes : 160
Fecha de inscripción : 04/02/2012
Localización : Valencia

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Roamaz el Sáb Feb 25, 2012 6:55 am

De momento, NO TOQUÉIS NADA, ademas, no se puede tocar, solo es información de lo que carga la tablet al inicio, es solo información que suelta el kernel y otros archivos.

En un rato, iré poniendo comandos linux para que aprendáis (si queréis ) como va el tema.

S2s.

_________________
Primux Bora.



Bora ICS 4.0.4+CWM+CM9.

Contribuid al foro o esto se hunde.

No respondo a preguntas por MP, hacedlas en el foro y todos aprendemos así.
avatar
Roamaz
Maestro Bora
Maestro Bora

Mensajes : 631
Fecha de inscripción : 01/02/2012
Edad : 53
Localización : /home/android/bora

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Ryw el Sáb Feb 25, 2012 7:12 am

ROAMAZ CAMBIA LA MAC PON UNA FALSA EN EL ARCH texto

avatar
Ryw
Maestro Bora
Maestro Bora

Mensajes : 524
Fecha de inscripción : 31/01/2012
Edad : 26
Localización : Sevilla

http://primuxbora.el-foro.net

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Roamaz el Sáb Feb 25, 2012 7:33 am

Ryw escribió:ROAMAZ CAMBIA LA MAC PON UNA FALSA EN EL ARCH texto


Hecho, prefiero eliminarla.

S2s.

_________________
Primux Bora.



Bora ICS 4.0.4+CWM+CM9.

Contribuid al foro o esto se hunde.

No respondo a preguntas por MP, hacedlas en el foro y todos aprendemos así.
avatar
Roamaz
Maestro Bora
Maestro Bora

Mensajes : 631
Fecha de inscripción : 01/02/2012
Edad : 53
Localización : /home/android/bora

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Ryw el Sáb Feb 25, 2012 9:10 am

Jejeje mucho mejor entonces.
avatar
Ryw
Maestro Bora
Maestro Bora

Mensajes : 524
Fecha de inscripción : 31/01/2012
Edad : 26
Localización : Sevilla

http://primuxbora.el-foro.net

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Roamaz el Sáb Feb 25, 2012 9:22 am

Mas cosas, esta tablet tiene micrófono "buil in" integrado, vaya, y estoy buscando una apk para búsqueda en google por voz.

A ver si la encuentro. Smile

S2s.

_________________
Primux Bora.



Bora ICS 4.0.4+CWM+CM9.

Contribuid al foro o esto se hunde.

No respondo a preguntas por MP, hacedlas en el foro y todos aprendemos así.
avatar
Roamaz
Maestro Bora
Maestro Bora

Mensajes : 631
Fecha de inscripción : 01/02/2012
Edad : 53
Localización : /home/android/bora

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Ryw el Sáb Feb 25, 2012 9:46 am

Roamaz escribió:Mas cosas, esta tablet tiene micrófono "buil in" integrado, vaya, y estoy buscando una apk para búsqueda en google por voz.

A ver si la encuentro. Smile

S2s.

Esto último lo sabía yo pues suelo realizar con ella bastantes llamadas por skype, que por cierto, con una calidad excelente.
avatar
Ryw
Maestro Bora
Maestro Bora

Mensajes : 524
Fecha de inscripción : 31/01/2012
Edad : 26
Localización : Sevilla

http://primuxbora.el-foro.net

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Roamaz el Sáb Feb 25, 2012 9:53 am

Ryw escribió:
Roamaz escribió:Mas cosas, esta tablet tiene micrófono "buil in" integrado, vaya, y estoy buscando una apk para búsqueda en google por voz.

A ver si la encuentro. Smile

S2s.

Esto último lo sabía yo pues suelo realizar con ella bastantes llamadas por skype, que por cierto, con una calidad excelente.

Pues ya he encontrado un programita para busquedas en internet por voz. bounce bounce bounce cheers cheers cheers cheers

BUsca "vlingo" en blackmarket y flipalo. cat cat cat

PD: metete en el chat o en el mess. Smile

_________________
Primux Bora.



Bora ICS 4.0.4+CWM+CM9.

Contribuid al foro o esto se hunde.

No respondo a preguntas por MP, hacedlas en el foro y todos aprendemos así.
avatar
Roamaz
Maestro Bora
Maestro Bora

Mensajes : 631
Fecha de inscripción : 01/02/2012
Edad : 53
Localización : /home/android/bora

Volver arriba Ir abajo

Re: Mostrando los servicios y dispositivos del Bora.

Mensaje  Contenido patrocinado


Contenido patrocinado


Volver arriba Ir abajo

Ver el tema anterior Ver el tema siguiente Volver arriba

- Temas similares

 
Permisos de este foro:
No puedes responder a temas en este foro.